The AG Neovo HIP-Series (HIP-TA + HIP-RA) HDMI over IP Extenders over single CAT6 for digital signage applications.
The AG Neovo HIP-Series HDMI over IP Extenders deliver 1080p HDMI A/V signals over long distances via a standard Gigabit network switch.
The HDMI over IP extenders allow HDMI equipment to be connected up to 120 meters (400 ft) away with a single Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several transmitters and receivers to the same network.
Point-to-Point Application
Point-to-Multipoint Application
Multipoint-to-Multipoint Application
Note:
Support for multiple transmitters require a managed network switch with VLAN/IGMP support. Each VLAN acts as a separate HDMI over IP Channel on the network.
Units | HIP-TA | HIP-RA |
Unit Description | HDMI over IP Transmitter | HDMI over IP Receiver |
HDMI Compliance | HDMI 1.2 | |
HDCP Compliance | Yes | |
Maximum Distance | Cat5e/6: 100 m (330 ft) up to 1080p / Cat5e/6: 120 m (400 ft) when used point-to-point without a network switch | |
Compression Technology | Motion JPEG compression with very low latency | |
Network Bandwidth | Approximately 90 Mbps | |
Video Resolutions | 480i / 480p / 720p / 1080i / 1080p | |
Audio Support | PCM 2.0 | |
IR Frequency | 38-56 kHz | |
Input | RJ45 x 1 / HDMI x 1 / IR-TX port x 1 | |
Output | RJ45 x 1 / HDMI x 1 / IR-RX port x 1 | |
Dimensions (L x W x H) | 103.5 x 93.5 x 24.6 mm | |
Weight | 220 g | |
Power Supply | DC 5V/1A | |
Power Consumption | 3W Max Each | |
Operating Temperature | -5° to 40°C (32° to 104°F) | |
Storage Temperature | -20° to 60°C (-4° to 140°F) | |
Relative Humidity | 5% to 90% RH (non-condensation) | |
Package Contents | HIP-TA: HIP Transmitter x 1 / Power Adapter x 1 / IR-TX Cable x 1 / User Manual x 1 HIP-RA: HIP Receiver x 1 / Power Adapter x 1 / IR-RX Cable x 1 / User Manual x 1 |